Biological control of foodborne pathogens by lacticacid bacteria: A focus on juice processing industries

Abstract The use of lactic acid bacteria (LAB) in foods as biocontrol agents against foodborne pathogens has become increasingly known. Under the premise that controlling the adhesion of microorganisms to food contact surfaces is an essential step for meeting the goals of food processing, the aim of this work was to investigate the inhibitory and anti-biofilm effectiveness of Lactobacillus rhamnosus GG (ATCC 53103) and Lactobacillus casei (ATCC 393) against Escherichia coli O157:H7, Salmonella enterica and Listeria monocytogenes. Lactobacillus strains (108UFCCFU/ml) and pathogens (104UFCCFU/ml) were evaluated to monitor LAB anti-adhesive and antibiofilm effect, in two main scenarios: (i) co-adhesion and (ii) pathogen incorporation to stainless steel surfaces with a protective biofilm of Lactobacillus cells. In (i) the predominant effect was observed in L. rhamnosus against S. enterica and L. monocytogenes, whereas in (ii) both LAB significantly reduced the number of pathogenic adherent cells. The effect of pre-established LAB biofilms was more successful in displacing the three pathogens than when they were evaluated under co-adhesion. These findings show that both LAB can be considered good candidates to prevent or inhibit the adhesion and colonization of L. monocytogenes, S. enterica and E. coli O157:H7 on surfaces and conditions of relevance for juice processing industries, offering alternatives for improving the safety and quality of fruit-based products.

Resumen Existe un creciente interés en el uso de bacterias ácido lácticas (BAL) como agentes de biocontrol frente a patógenos de transmisión alimentaria. Bajo la premisa de que el control de la adhesión de microorganismos a superficies de contacto con alimentos es el paso esencial para evitar su contaminación, el objetivo de este trabajo fue investigar la efectividad inhibitoria y antibiofilm de Lactobacillus rhamnosus GG (ATCC 53103) y Lactobacillus casei (ATCC 393) frente a Escherichia coli O157:H7, Salmonella enterica y Listeria monocytogenes. A fin de cumplir con el objetivo propuesto, las cepas de Lactobacillus (108UFCUFC/ml) y los patógenos (104UFCUFC/ml) se ensayaron en 2 escenarios: (1) coadhesión, y (2) incorporación de los patógenos a las superficies de acero inoxidable con un biofilm preformado de Lactobacillus. En (1), el efecto predominante se observó con L. rhamnosus frente a S. enterica y L. monocytogenes, mientras que en (2), ambas BAL redujeron significativamente el número de células patógenas adheridas. En función de estos resultados, concluimos que el efecto de un biofilm preformado de ambas BAL fue más exitoso en el desplazamiento de los 3 patógenos que en coadhesión. Ambas BAL pueden considerarse buenas candidatas para mitigar la adhesión y colonización de L. monocytogenes, S. enterica y E. coli O157:H7 en superficies en condiciones de relevancia para la industria procesadora de jugos, y, de esta manera, ofrecer alternativas para mejorar la seguridad y calidad de los alimentos a base de frutas.

Biological control of foodborne pathogens by lactic acid bacteria: A focus on juice processing industries.

The use of lactic acid bacteria (LAB) in foods as biocontrol agents against foodborne pathogens has become increasingly known. Under the premise that controlling the adhesion of microorganisms to food contact surfaces is an essential step for meeting the goals of food processing, the aim of this work was to investigate the inhibitory and anti-biofilm effectiveness of Lactobacillus rhamnosus GG (ATCC 53103) and Lactobacillus casei (ATCC 393) against Escherichia coli O157:H7, Salmonella enterica and Listeria monocytogenes. Lactobacillus strains (108CFU/ml) and pathogens (104CFU/ml) were evaluated to monitor LAB anti-adhesive and antibiofilm effect, in two main scenarios: (i) co-adhesion and (ii) pathogen incorporation to stainless steel surfaces with a protective biofilm of Lactobacillus cells. In (i) the predominant effect was observed in L. rhamnosus against S. enterica and L. monocytogenes, whereas in (ii) both LAB significantly reduced the number of pathogenic adherent cells. The effect of pre-established LAB biofilms was more successful in displacing the three pathogens than when they were evaluated under co-adhesion. These findings show that both LAB can be considered good candidates to prevent or inhibit the adhesion and colonization of L. monocytogenes, S. enterica and E. coli O157:H7 on surfaces and conditions of relevance for juice processing industries, offering alternatives for improving the safety and quality of fruit-based products.

Monitoring Growth and Removal of Pseudomonas Biofilms on Cellulose-Based Fabrics.

Biofilms are often tolerant towards routine cleaning and disinfection processes. As they can grow on fabrics in household or healthcare settings, resulting in odors and serious health problems, it is necessary to contain biofilms through eradication strategies. The current study proposes a novel test model for the growth and removal of biofilms on textiles with Pseudomonas fluorescens and the opportunistic nosocomial pathogen Pseudomonas aeruginosa as model organisms. To assess the biofilm removal on fabrics, (1) a detergent-based, (2) enzyme-based, and (3) combined formulation of both detergent and enzymes (F1/2) were applied. Biofilms were analyzed microscopically (FE-SEM, SEM, 3D laser scanning- and epifluorescence microscopy), via a quartz crystal microbalance with mass dissipation monitoring (QCM-D) as well as plate counting of colonies. This study indicated that Pseudomonas spp. form robust biofilms on woven cellulose that can be efficiently removed via F1/2, proven by a significant reduction (p < 0.001) of viable bacteria in biofilms. Moreover, microscopic analysis indicated a disruption and almost complete removal of the biofilms after F1/2 treatment. QCM-D measurements further confirmed a maximal mass dissipation change after applying F1/2. The combination strategy applying both enzymes and detergent is a promising antibiofilm approach to remove bacteria from fabrics.

Application of natamycin and farnesol as bioprotection agents to inhibit biofilm formation of yeasts and foodborne bacterial pathogens in apple juice processing lines.

Biofilms serve as a reservoir for pathogenic and spoilage microorganisms, and their removal from different surfaces is a recurring problem in the beverage industry. This study aimed to investigate the effect of a combination of natamycin (NAT, 0.01 mmol/l) and farnesol (FAR, 0.6 mmol/l) against biofilms on ultrafiltration (UF) membranes and stainless steel (SS) surfaces using apple juice as food matrix. The co-adhesion of Rhodotorula mucilaginosa, Candida tropicalis, C. krusei and C. kefyr (mixed-yeast) with Listeria monocytogenes, Salmonella enterica or Escherichia coli O157:H7 (multi-species) in presence of NAT + FAR was evaluated for 2, 24, 48 h. In biofilms treated with NAT + FAR were observed by cell quantification and microscopy, inhibition of the filamentous yeast forms, disruption of the tri-dimensional structure and a high detachment of yeast cells. NAT + FAR affected the biofilms independently of the surfaces used and the presence (or not) of bacteria. L. monocytogenes was the most susceptible (p < 0.001) in multi-species biofilms, followed by E. coli O157:H7 on both surfaces (p < 0.001), whereas the growth of S. enterica was reduced (p < 0.05) in SS but not in UF-membranes (p > 0.05). Since the combination NAT + FAR affected the structure and viability of yeast species and foodborne pathogens in multi-species biofilms developed on UF-membranes and SS surfaces, the combination proposed could be considered a promising control agent to prevent biofilms in apple juice processing lines.

Biosorption of aluminum through the use of non-viable biomass of Pseudomonas putida.

Living and non-living biomass of Pseudomonas putida A (ATCC 12633) was used as biosorbent for the removing of Al(3+) from aqueous solutions. The process was stable with time, efficient at pH 4.3 and between 15°C and 42°C. Two isotherms models were applied to describe the interaction between the biosorbent and Al(3+). Non-living biomass of P. putida A (ATCC 12633) was found to be the most efficient at adsorbing Al(3+) with a maximum sorption capacity of 0.55mg Al(3+)/gr adsorbent and with 36×10(5) binding sites of Al(3+)/microorganisms. Infrared spectroscopy analysis shows that the biosorbent present some vibrational band of functional groups that change in presence of Al(3+): hydroxyl, carboxyl and phosphate. Considering that Al(3+) binds to the phosphate group of phosphatidylcholine, non-viable biomass of P. putida PB01 (mutant lacking phosphatidylcholine) was used. Aluminum adsorption of the parental strain was 30 times higher than values registered in P. putida PB01 (36×10(5) sites/microorganism vs 1.2×10(5) sites/microorganism, respectively). This result evidenced that the absence of phosphatidylcholine significantly affected the availability of the binding sites and consequently the efficiency of the biomass to adsorb Al(3+).